How to replace samsung da29 00020b water filter?

Step 1: Find your refrigerator model number. The model number is located inside of the refrigerator, likely on the left side wall. Common Samsung refrigerator models that work with the DA29-00020B filter include:



Fits Samsung Refrigerators

• RSG307AARS
• RF23J9011SR
• RS261MDWP
• RS267TD
• RF4287HARS/XAA
• RS265TDRS
• RS261MDBP
• RS261MDRS
• RFG298HDRS

Step 2: Locate your water filter housing. The water filter housing will look like a knob. It may be located in the refrigerator section near the crispers or on the exterior of the refrigerator near the toe grille. Refer to your Owner’s Manual for the specific location of your water filter housing.

Step 3: Turn Off the Water Supply. Before removing the water filter, be sure to turn off the water supply. Carefully move the refrigerator forward to access the water shut off valve in the back. Be extremely careful that you don’t scratch the floors or tear the linoleum!

Step 4: Remove the old filter. Rotate the filter counter clockwise to unscrew the old filter from the housing. Take off the knob-style cap, and dispose of the old filter.

Step 5: Install the new filter. Place the knob-style cap on the back of the new filter. Remove the small (likely blue) cap located on the front of the new filter. Replace the filter by turning the knob clockwise until secure. You may hear a mild hissing sound as you install the filter; this is normal.

Step 6: Turn the water back on. Turn the water supply back on, and scoot the refrigerator back into place.

Step 7: Flush about 1 gallon of water through the filter. You may notice the water sputters for a few seconds. This is just the air escaping the lines. Now you’re ready to drink.

Step 8: Reset the Water Filter Status light. Press the water filter reset button and hold for 3 seconds. Your refrigerator will remind you to change the filter again in 6 months or 300 gallons, which ever is sooner.